Ironic Inspector 配置选项¶
以下是一个 Ironic Inspector 示例配置，可供调整和使用。它是在构建此文档时从 Ironic Inspector 自动生成的，因此如果您发现某个选项存在问题，请将您的 Ironic Inspector 版本与此文档的版本进行比较。
示例配置也可以作为 文件 下载。
[DEFAULT]
#
# From ironic_inspector
#
# IP to listen on. (string value)
#listen_address = ::
# Port to listen on. (port value)
# Minimum value: 0
# Maximum value: 65535
#listen_port = 5050
# Unix socket to listen on. Disables listen_address and listen_port.
# (string value)
#listen_unix_socket = <None>
# File mode (an octal number) of the unix socket to listen on. Ignored
# if listen_unix_socket is not set. (integer value)
#listen_unix_socket_mode = <None>
# Name of this node. This can be an opaque identifier. It is not
# necessarily a hostname, FQDN, or IP address. However, the node name
# must be valid within an AMQP key. (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#host = localhost
# Authentication method used on the ironic-inspector API. "noauth",
# "keystone" or "http_basic" are valid options. "noauth" will disable
# all authentication. (string value)
# Possible values:
# noauth - no authentication
# keystone - use the Identity service for authentication
# http_basic - HTTP basic authentication
#auth_strategy = keystone
# Path to Apache format user authentication file used when
# auth_strategy=http_basic (string value)
#http_basic_auth_user_file = /etc/ironic-inspector/htpasswd
# Timeout after which introspection is considered failed, set to 0 to
# disable. (integer value)
# Maximum value: 315576000
#timeout = 3600
# Amount of time in seconds, after which repeat clean up of timed out
# nodes and old nodes status information. WARNING: If set to a value
# of 0, then the periodic task is disabled and inspector will not sync
# with ironic to complete the internal clean-up process. Not advisable
# if the deployment uses a PXE filter, and will result in the ironic-
# inspector ceasing periodic cleanup activities. (integer value)
# Minimum value: 0
#clean_up_period = 60
# Interval (in seconds) between leader elections. (integer value)
#leader_election_interval = 10
# SSL Enabled/Disabled (boolean value)
#use_ssl = false
# The green thread pool size. (integer value)
# Minimum value: 2
#max_concurrency = 1000
# Delay (in seconds) between two introspections. Only applies when
# boot is managed by ironic-inspector (i.e. manage_boot==True).
# (integer value)
#introspection_delay = 5
# Ironic driver_info fields that are equivalent to ipmi_address. (list
# value)
#ipmi_address_fields = redfish_address,ilo_address,drac_host,drac_address,ibmc_address
# Path to the rootwrap configuration file to use for running commands
# as root (string value)
#rootwrap_config = /etc/ironic-inspector/rootwrap.conf
# Limit the number of elements an API list-call returns (integer
# value)
# Minimum value: 1
#api_max_limit = 1000
# Whether the current installation of ironic-inspector can manage PXE
# booting of nodes. If set to False, the API will reject introspection
# requests with manage_boot missing or set to True. (boolean value)
#can_manage_boot = true
# Whether to enable publishing the ironic-inspector API endpoint via
# multicast DNS. (boolean value)
#enable_mdns = false
# Whether to run ironic-inspector as a standalone service. It's
# EXPERIMENTAL to set to False. (boolean value)
#standalone = true
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG instead of
# the default INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# The name of a logging configuration file. This file is appended to
# any existing logging configuration files. For details about logging
# configuration files, see the Python logging module documentation.
# Note that when logging configuration files are used then all logging
# configuration is set in the configuration file and other logging
# configuration options are ignored (for example, log-date-format).
# (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>
# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set.
# (string value)
#log_date_format = %Y-%m-%d %H:%M:%S
# (Optional) Name of log file to send logging output to. If no default
# is set, logging will go to stderr as defined by use_stderr. This
# option is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>
# (Optional) The base directory used for relative log_file paths.
# This option is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
# DEPRECATED: Uses logging handler designed to watch file system. When
# log file is moved or removed this handler will open a new log file
# with specified path instantaneously. It makes sense only if log_file
# option is specified and Linux platform is used. This option is
# ignored if log_config_append is set. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This function is known to have bene broken for long time,
# and depends on the unmaintained library
#watch_log_file = false
# Use syslog for logging. Existing syslog format is DEPRECATED and
# will be changed later to honor RFC5424. This option is ignored if
# log_config_append is set. (boolean value)
#use_syslog = false
# Enable journald for logging. If running in a systemd environment you
# may wish to enable journal support. Doing so will use the journal
# native protocol which includes structured metadata in addition to
# log messages.This option is ignored if log_config_append is set.
# (boolean value)
#use_journal = false
# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER
# Use JSON formatting for logging. This option is ignored if
# log_config_append is set. (boolean value)
#use_json = false
# Log output to standard error. This option is ignored if
# log_config_append is set. (boolean value)
#use_stderr = false
# (Optional) Set the 'color' key according to log levels. This option
# takes effect only when logging to stderr or stdout is used. This
# option is ignored if log_config_append is set. (boolean value)
#log_color = false
# The amount of time before the log files are rotated. This option is
# ignored unless log_rotation_type is set to "interval". (integer
# value)
#log_rotate_interval = 1
# Rotation interval type. The time of the last file change (or the
# time when the service was started) is used when scheduling the next
# rotation. (string value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days
# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30
# Log file maximum size in MB. This option is ignored if
# "log_rotation_type" is not set to "size". (integer value)
#max_logfile_size_mb = 200
# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none
# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
# Format string to use for log messages when context is undefined.
# Used by oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
# Additional data to append to log message when logging level for the
# message is DEBUG. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_user_identity_format = %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
# List of package logging levels in logger=LEVEL pairs. This option is
# ignored if log_config_append is set. (list value)
#default_log_levels = sqlalchemy=WARNING,iso8601=WARNING,requests=WARNING,urllib3.connectionpool=WARNING,keystonemiddleware=WARNING,keystoneauth=WARNING,ironicclient=WARNING,amqp=WARNING,amqplib=WARNING,stevedore=WARNING,oslo.messaging=WARNING,oslo_messaging=WARNING
# Enables or disables publication of error events. (boolean value)
#publish_errors = false
# The format for an instance that is passed with the log message.
# (string value)
#instance_format = "[instance: %(uuid)s] "
# The format for an instance UUID that is passed with the log message.
# (string value)
#instance_uuid_format = "[instance: %(uuid)s] "
# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0
# Maximum number of logged messages per rate_limit_interval. (integer
# value)
#rate_limit_burst = 0
# Log level name used by rate limiting. Logs with level greater or
# equal to rate_limit_except_level are not filtered. An empty string
# means that all levels are filtered. (string value)
# Possible values:
# CRITICAL - <No description provided>
# ERROR - <No description provided>
# INFO - <No description provided>
# WARNING - <No description provided>
# DEBUG - <No description provided>
# '' - <No description provided>
#rate_limit_except_level = CRITICAL
# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false
#
# From oslo.messaging
#
# Size of executor thread pool when executor is threading or eventlet.
# (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64
# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60
# The network address and optional user credentials for connecting to
# the messaging backend, in URL format. The expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the documentation of
# oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/2025.2/reference/transport.html
# (string value)
#transport_url = rabbit://
# The default exchange under which topics are scoped. May be
# overridden by an exchange name specified in the transport_url
# option. (string value)
#control_exchange = openstack
# Add an endpoint to answer to ping calls. Endpoint is named
# oslo_rpc_server_ping (boolean value)
#rpc_ping_enabled = false
#
# From oslo.service.service
#
# DEPRECATED: Enable eventlet backdoor. Acceptable values are 0,
# <port>, and <start>:<end>, where 0 results in listening on a random
# tcp port number; <port> results in listening on the specified port
# number (and not enabling backdoor if that port is in use); and
# <start>:<end> results in listening on the smallest unused port
# number within the specified range of port numbers. The chosen port
# is displayed in the service's log file. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'backdoor_port' option is deprecated and will be removed
# in a future release.
#backdoor_port = <None>
# DEPRECATED: Enable eventlet backdoor, using the provided path as a
# unix socket that can receive connections. This option is mutually
# exclusive with 'backdoor_port' in that only one should be provided.
# If both are provided then the existence of this option overrides the
# usage of that option. Inside the path {pid} will be replaced with
# the PID of the current process. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'backdoor_socket' option is deprecated and will be
# removed in a future release.
#backdoor_socket = <None>
# Enables or disables logging values of all registered options when
# starting a service (at DEBUG level). (boolean value)
#log_options = true
# Specify a timeout after which a gracefully shutdown server will
# exit. Zero value means endless wait. (integer value)
#graceful_shutdown_timeout = 60
#
# From oslo.service.wsgi
#
# DEPRECATED: File name for the paste.deploy config for api service
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'api_paste_config' option is deprecated and will be
# removed in a future release.
#api_paste_config = api-paste.ini
# DEPRECATED: A python format string that is used as the template to
# generate log lines. The following values can beformatted into it:
# client_ip, date_time, request_line, status_code, body_length,
# wall_seconds. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'wsgi_log_format' option is deprecated and will be
# removed in a future release.
#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
# DEPRECATED: Sets the value of TCP_KEEPIDLE in seconds for each
# server socket. Not supported on OS X. (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'tcp_keepidle' option is deprecated and will be removed
# in a future release.
#tcp_keepidle = 600
# DEPRECATED: Size of the pool of greenthreads used by wsgi (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'wsgi_default_pool_size' option is deprecated and will
# be removed in a future release.
#wsgi_default_pool_size = 100
# DEPRECATED: Maximum line size of message headers to be accepted.
# max_header_line may need to be increased when using large tokens
# (typically those generated when keystone is configured to use PKI
# tokens with big service catalogs). (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'max_header_line' option is deprecated and will be
# removed in a future release.
#max_header_line = 16384
# DEPRECATED: If False, closes the client socket connection
# explicitly. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'wsgi_keep_alive' option is deprecated and will be
# removed in a future release.
#wsgi_keep_alive = true
# DEPRECATED: Timeout for client connections' socket operations. If an
# incoming connection is idle for this number of seconds it will be
# closed. A value of '0' means wait forever. (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'client_socket_timeout' option is deprecated and will be
# removed in a future release.
#client_socket_timeout = 900
# DEPRECATED: True if the server should send exception tracebacks to
# the clients on 500 errors. If False, the server will respond with
# empty bodies. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'wsgi_server_debug' option is deprecated and will be
# removed in a future release.
#wsgi_server_debug = false
[capabilities]
#
# From ironic_inspector
#
# Whether to store the boot mode (BIOS or UEFI). (boolean value)
#boot_mode = false
# Mapping between a CPU flag and a capability to set if this flag is
# present. (dict value)
#cpu_flags = aes:cpu_aes,pdpe1gb:cpu_hugepages_1g,pse:cpu_hugepages,smx:cpu_txt,svm:cpu_vt,vmx:cpu_vt
[coordination]
#
# From ironic_inspector
#
# The backend URL to use for distributed coordination. EXPERIMENTAL.
# (string value)
#backend_url = memcached://:11211
[cors]
#
# From oslo.middleware.cors
#
# Indicate whether this resource may be shared with the domain
# received in the requests "origin" header. Format:
# "<protocol>://<host>[:<port>]", no trailing slash. Example:
# https://horizon.example.com (list value)
#allowed_origin = <None>
# Indicate that the actual request can include user credentials
# (boolean value)
#allow_credentials = true
# Indicate which headers are safe to expose to the API. Defaults to
# HTTP Simple Headers. (list value)
#expose_headers =
# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600
# Indicate which methods can be used during the actual request. (list
# value)
#allow_methods = GET,POST,PUT,HEAD,PATCH,DELETE,OPTIONS
# Indicate which header field names may be used during the actual
# request. (list value)
#allow_headers = X-Auth-Token,X-OpenStack-Ironic-Inspector-API-Minimum-Version,X-OpenStack-Ironic-Inspector-API-Maximum-Version,X-OpenStack-Ironic-Inspector-API-Version
[database]
#
# From oslo.db
#
# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true
# The back end to use for the database. (string value)
#backend = sqlalchemy
# The SQLAlchemy connection string to use to connect to the database.
# (string value)
#connection = <None>
# The SQLAlchemy connection string to use to connect to the slave
# database. (string value)
#slave_connection = <None>
# The SQLAlchemy asyncio connection string to use to connect to the
# database. (string value)
#asyncio_connection = <None>
# The SQLAlchemy asyncio connection string to use to connect to the
# slave database. (string value)
#asyncio_slave_connection = <None>
# The SQL mode to be used for MySQL sessions. This option, including
# the default, overrides any server-set SQL mode. To use whatever SQL
# mode is set by the server configuration, set this to no value.
# Example: mysql_sql_mode= (string value)
#mysql_sql_mode = TRADITIONAL
# For Galera only, configure wsrep_sync_wait causality checks on new
# connections. Default is None, meaning don't configure any setting.
# (integer value)
#mysql_wsrep_sync_wait = <None>
# Connections which have been present in the connection pool longer
# than this number of seconds will be replaced with a new one the next
# time they are checked out from the pool. (integer value)
#connection_recycle_time = 3600
# Maximum number of SQL connections to keep open in a pool. Setting a
# value of 0 indicates no limit. (integer value)
#max_pool_size = 5
# Maximum number of database connection retries during startup. Set to
# -1 to specify an infinite retry count. (integer value)
#max_retries = 10
# Interval between retries of opening a SQL connection. (integer
# value)
#retry_interval = 10
# If set, use this value for max_overflow with SQLAlchemy. (integer
# value)
#max_overflow = 50
# Verbosity of SQL debugging information: 0=None, 100=Everything.
# (integer value)
# Minimum value: 0
# Maximum value: 100
#connection_debug = 0
# Add Python stack traces to SQL as comment strings. (boolean value)
#connection_trace = false
# If set, use this value for pool_timeout with SQLAlchemy. (integer
# value)
#pool_timeout = <None>
# Enable the experimental use of database reconnect on connection
# lost. (boolean value)
#use_db_reconnect = false
# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1
# If True, increases the interval between retries of a database
# operation up to db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true
# If db_inc_retry_interval is set, the maximum seconds between retries
# of a database operation. (integer value)
#db_max_retry_interval = 10
# Maximum retries in case of connection error or deadlock error before
# error is raised. Set to -1 to specify an infinite retry count.
# (integer value)
#db_max_retries = 20
# Optional URL parameters to append onto the connection URL at connect
# time; specify as param1=value1¶m2=value2&... (string value)
#connection_parameters =
[discovery]
#
# From ironic_inspector
#
# The name of the Ironic driver used by the enroll hook when creating
# a new node in Ironic. (string value)
#enroll_node_driver = fake-hardware
# Additional fields to set on newly discovered nodes. (dict value)
#enroll_node_fields =
# IP version of BMC address that will be used when enrolling a new
# node in Ironic. Defaults to "4,6". Could be "4" (use v4 address
# only), "4,6" (v4 address have higher priority and if both addresses
# found v6 version is ignored), "6,4" (v6 is desired but fall back to
# v4 address for BMCs having v4 address, opposite to "4,6"), "6" (use
# v6 address only and ignore v4 version). (list value)
#enabled_bmc_address_version = 4,6
[dnsmasq_pxe_filter]
#
# From ironic_inspector
#
# The MAC address cache directory, exposed to dnsmasq.This directory
# is expected to be in exclusive control of the driver. (string value)
#dhcp_hostsdir = /var/lib/ironic-inspector/dhcp-hostsdir
# Purge the hostsdir upon driver initialization. Setting to false
# should only be performed when the deployment of inspector is such
# that there are multiple processes executing inside of the same host
# and namespace. In this case, the Operator is responsible for setting
# up a custom cleaning facility. (boolean value)
#purge_dhcp_hostsdir = true
# A (shell) command line to start the dnsmasq service upon filter
# initialization. Default: don't start. (string value)
#dnsmasq_start_command =
# A (shell) command line to stop the dnsmasq service upon inspector
# (error) exit. Default: don't stop. (string value)
#dnsmasq_stop_command =
[exception]
#
# From ironic_inspector
#
# Used if there is a formatting error when generating an exception
# message (a programming error). If True, raise an exception; if
# False, use the unformatted message. (boolean value)
#fatal_exception_format_errors = false
[extra_hardware]
#
# From ironic_inspector
#
# If True, refuse to parse extra data if at least one record is too
# short. Additionally, remove the incoming "data" even if parsing
# failed. (boolean value)
#strict = false
[healthcheck]
#
# From ironic_inspector
#
# Enable the health check endpoint at /healthcheck. Note that this is
# unauthenticated. More information is available at
# https://docs.openstack.org/oslo.middleware/2025.2/reference/healthcheck_plugins.html.
# (boolean value)
#enabled = false
#
# From oslo.middleware.healthcheck
#
# DEPRECATED: The path to respond to healtcheck requests on. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#path = /healthcheck
# Show more detailed information as part of the response. Security
# note: Enabling this option may expose sensitive details about the
# service being monitored. Be sure to verify that it will not violate
# your security policies. (boolean value)
#detailed = false
# Additional backends that can perform health checks and report that
# information back as part of a request. (list value)
#backends =
# A list of network addresses to limit source ip allowed to access
# healthcheck information. Any request from ip outside of these
# network addresses are ignored. (list value)
#allowed_source_ranges =
# Ignore requests with proxy headers. (boolean value)
#ignore_proxied_requests = false
# Check the presence of a file to determine if an application is
# running on a port. Used by DisableByFileHealthcheck plugin. (string
# value)
#disable_by_file_path = <None>
# Check the presence of a file based on a port to determine if an
# application is running on a port. Expects a "port:path" list of
# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
#disable_by_file_paths =
# Check the presence of files. Used by EnableByFilesHealthcheck
# plugin. (list value)
#enable_by_file_paths =
[iptables]
#
# From ironic_inspector
#
# Interface on which dnsmasq listens, the default is for VM's. (string
# value)
#dnsmasq_interface = br-ctlplane
# iptables chain name to use. (string value)
#firewall_chain = ironic-inspector
# List of Ethernet Over InfiniBand interfaces on the Inspector host
# which are used for physical access to the DHCP network. Multiple
# interfaces would be attached to a bond or bridge specified in
# dnsmasq_interface. The MACs of the InfiniBand nodes which are not in
# desired state are going to be blocked based on the list of neighbor
# MACs on these interfaces. (list value)
#ethoib_interfaces =
# The IP version that will be used for iptables filter. Defaults to 4.
# (string value)
# Possible values:
# 4 - IPv4
# 6 - IPv6
#ip_version = 4
[ironic]
#
# From ironic_inspector
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [ironic]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying HTTPs
# connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection errors. If not
# set, exponential retry starting with 0.5 seconds up to a maximum of
# 60 seconds is used. (floating point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters. It will
# be used for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client. NOTE: The
# unversioned endpoint should be specified here; to request a
# particular API version, use the `version`, `min-version`, and/or
# `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be used as the
# upper bound of a range with min_version. Mutually exclusive with
# version. (string value)
#max_version = <None>
# Maximum number of retries in case of conflict error (HTTP 409).
# (integer value)
#max_retries = 30
# The minimum major version of a given API, intended to be used as the
# lower bound of a range with max_version. Mutually exclusive with
# version. If min_version is given with no max_version it is as if max
# version is "latest". (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [ironic]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [ironic]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string value)
#region_name = <None>
# List of retriable HTTP status codes that should be retried. If not
# set default to [503] (list value)
#retriable_status_codes = <None>
# Interval between retries in case of conflict error (HTTP 409).
# (integer value)
#retry_interval = 2
# The default service_name for endpoint URL discovery. (string value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string value)
#service_type = baremetal
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for retriable
# HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status codes.
# If not set, exponential retry starting with 0.5 seconds up to a
# maximum of 60 seconds is used. (floating point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [ironic]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint URL. (list
# value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version for
# endpoint URL discovery. Mutually exclusive with min_version and
# max_version (string value)
#version = <None>
[keystone_authtoken]
#
# From keystonemiddleware.auth_token
#
# Complete "public" Identity API endpoint. This endpoint should not be
# an "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to
# authenticate. Although this endpoint should ideally be unversioned,
# client support in the wild varies. If you're using a versioned v2
# endpoint here, then this should *not* be the same endpoint the
# service user utilizes for validating tokens, because normal end
# users may not be able to reach that endpoint. (string value)
# Deprecated group/name - [keystone_authtoken]/auth_uri
#www_authenticate_uri = <None>
# DEPRECATED: Complete "public" Identity API endpoint. This endpoint
# should not be an "admin" endpoint, as it should be accessible by all
# end users. Unauthenticated clients are redirected to this endpoint
# to authenticate. Although this endpoint should ideally be
# unversioned, client support in the wild varies. If you're using a
# versioned v2 endpoint here, then this should *not* be the same
# endpoint the service user utilizes for validating tokens, because
# normal end users may not be able to reach that endpoint. This option
# is deprecated in favor of www_authenticate_uri and will be removed
# in the S release. (string value)
# This option is deprecated for removal since Queens.
# Its value may be silently ignored in the future.
# Reason: The auth_uri option is deprecated in favor of
# www_authenticate_uri and will be removed in the S release.
#auth_uri = <None>
# API version of the Identity API endpoint. (string value)
#auth_version = <None>
# Interface to use for the Identity API endpoint. Valid values are
# "public", "internal" (default) or "admin". (string value)
#interface = internal
# Do not handle authorization requests within the middleware, but
# delegate the authorization decision to downstream WSGI components.
# (boolean value)
#delay_auth_decision = false
# Request timeout value for communicating with Identity API server.
# (integer value)
#http_connect_timeout = <None>
# How many times are we trying to reconnect when communicating with
# Identity API Server. (integer value)
#http_request_max_retries = 3
# Request environment key where the Swift cache object is stored. When
# auth_token middleware is deployed with a Swift cache, use this
# option to have the middleware share a caching backend with swift.
# Otherwise, use the ``memcached_servers`` option instead. (string
# value)
#cache = <None>
# Required if identity server requires client certificate (string
# value)
#certfile = <None>
# Required if identity server requires client certificate (string
# value)
#keyfile = <None>
# A PEM encoded Certificate Authority to use when verifying HTTPs
# connections. Defaults to system CAs. (string value)
#cafile = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# The region in which the identity server can be found. (string value)
#region_name = <None>
# Optionally specify a list of memcached server(s) to use for caching.
# If left undefined, tokens will instead be cached in-process. (list
# value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>
# In order to prevent excessive effort spent validating tokens, the
# middleware caches previously-seen tokens for a configurable duration
# (in seconds). Set to -1 to disable caching completely. (integer
# value)
#token_cache_time = 300
# (Optional) If defined, indicate whether token data should be
# authenticated or authenticated and encrypted. If MAC, token data is
# authenticated (with HMAC) in the cache. If ENCRYPT, token data is
# encrypted and authenticated in the cache. If the value is not one of
# these options or empty, auth_token will raise an exception on
# initialization. (string value)
# Possible values:
# None - <No description provided>
# MAC - <No description provided>
# ENCRYPT - <No description provided>
#memcache_security_strategy = None
# (Optional, mandatory if memcache_security_strategy is defined) This
# string is used for key derivation. (string value)
#memcache_secret_key = <None>
# (Optional) Global toggle for TLS usage when comunicating with the
# caching servers. (boolean value)
#memcache_tls_enabled = false
# (Optional) Path to a file of concatenated CA certificates in PEM
# format necessary to establish the caching server's authenticity. If
# tls_enabled is False, this option is ignored. (string value)
#memcache_tls_cafile = <None>
# (Optional) Path to a single file in PEM format containing the
# client's certificate as well as any number of CA certificates needed
# to establish the certificate's authenticity. This file is only
# required when client side authentication is necessary. If
# tls_enabled is False, this option is ignored. (string value)
#memcache_tls_certfile = <None>
# (Optional) Path to a single file containing the client's private key
# in. Otherwhise the private key will be taken from the file specified
# in tls_certfile. If tls_enabled is False, this option is ignored.
# (string value)
#memcache_tls_keyfile = <None>
# (Optional) Set the available ciphers for sockets created with the
# TLS context. It should be a string in the OpenSSL cipher list
# format. If not specified, all OpenSSL enabled ciphers will be
# available. (string value)
#memcache_tls_allowed_ciphers = <None>
# (Optional) Number of seconds memcached server is considered dead
# before it is tried again. (integer value)
#memcache_pool_dead_retry = 300
# (Optional) Maximum total number of open connections to every
# memcached server. (integer value)
#memcache_pool_maxsize = 10
# (Optional) Socket timeout in seconds for communicating with a
# memcached server. (integer value)
#memcache_pool_socket_timeout = 3
# (Optional) Number of seconds a connection to memcached is held
# unused in the pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60
# (Optional) Number of seconds that an operation will wait to get a
# memcached client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10
# (Optional) Use the advanced (eventlet safe) memcached client pool.
# (boolean value)
#memcache_use_advanced_pool = true
# (Optional) Indicate whether to set the X-Service-Catalog header. If
# False, middleware will not ask for service catalog on token
# validation and will not set the X-Service-Catalog header. (boolean
# value)
#include_service_catalog = true
# Used to control the use and type of token binding. Can be set to:
# "disabled" to not check token binding. "permissive" (default) to
# validate binding information if the bind type is of a form known to
# the server and ignore it if not. "strict" like "permissive" but if
# the bind type is unknown the token will be rejected. "required" any
# form of token binding is needed to be allowed. Finally the name of a
# binding method that must be present in tokens. (string value)
#enforce_token_bind = permissive
# A choice of roles that must be present in a service token. Service
# tokens are allowed to request that an expired token can be used and
# so this check should tightly control that only actual services
# should be sending this token. Roles here are applied as an ANY check
# so any role in this list must be present. For backwards
# compatibility reasons this currently only affects the allow_expired
# check. (list value)
#service_token_roles = service
# For backwards compatibility reasons we must let valid service tokens
# pass that don't pass the service_token_roles check as valid. Setting
# this true will become the default in a future release and should be
# enabled if possible. (boolean value)
#service_token_roles_required = false
# The name or type of the service as it appears in the service
# catalog. This is used to validate tokens that have restricted access
# rules. (string value)
#service_type = <None>
# Enable the SASL(Simple Authentication and Security Layer) if the
# SASL_enable is true, else disable. (boolean value)
#memcache_sasl_enabled = false
# the user name for the SASL (string value)
#memcache_username =
# the username password for SASL (string value)
#memcache_password =
# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>
# Config Section from which to load plugin specific options (string
# value)
#auth_section = <None>
[mdns]
#
# From ironic_inspector
#
# Number of attempts to register a service. Currently has to be larger
# than 1 because of race conditions in the zeroconf library. (integer
# value)
# Minimum value: 1
#registration_attempts = 5
# Number of attempts to lookup a service. (integer value)
# Minimum value: 1
#lookup_attempts = 3
# Additional parameters to pass for the registered service. (dict
# value)
#params =
# List of IP addresses of interfaces to use for mDNS. Defaults to all
# interfaces on the system. (list value)
#interfaces = <None>
[oslo_messaging_kafka]
#
# From oslo.messaging
#
# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576
# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0
# Group id for Kafka consumer. Consumers in one group will coordinate
# message consumption (string value)
#consumer_group = oslo_messaging_consumer
# Upper bound on the delay for KafkaProducer batching in seconds
# (floating point value)
#producer_batch_timeout = 0.0
# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384
# The compression codec for all data generated by the producer. If not
# set, compression will not be used. Note that the allowed values of
# this depend on the kafka version (string value)
# Possible values:
# none - <No description provided>
# gzip - <No description provided>
# snappy - <No description provided>
# lz4 - <No description provided>
# zstd - <No description provided>
#compression_codec = none
# Enable asynchronous consumer commits (boolean value)
#enable_auto_commit = false
# The maximum number of records returned in a poll call (integer
# value)
#max_poll_records = 500
# Protocol used to communicate with brokers (string value)
# Possible values:
# PLAINTEXT - <No description provided>
# SASL_PLAINTEXT - <No description provided>
# SSL - <No description provided>
# SASL_SSL - <No description provided>
#security_protocol = PLAINTEXT
# Mechanism when security protocol is SASL (string value)
#sasl_mechanism = PLAIN
# CA certificate PEM file used to verify the server certificate
# (string value)
#ssl_cafile =
# Client certificate PEM file used for authentication. (string value)
#ssl_client_cert_file =
# Client key PEM file used for authentication. (string value)
#ssl_client_key_file =
# Client key password file used for authentication. (string value)
#ssl_client_key_password =
[oslo_messaging_notifications]
#
# From oslo.messaging
#
# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
#driver =
# A URL representing the messaging driver to use for notifications. If
# not set, we fall back to the same configuration used for RPC.
# (string value)
#transport_url = <None>
# AMQP topic used for OpenStack notifications. (list value)
#topics = notifications
# The maximum number of attempts to re-send a notification message
# which failed to be delivered due to a recoverable error. 0 - No
# retry, -1 - indefinite (integer value)
#retry = -1
[oslo_messaging_rabbit]
#
# From oslo.messaging
#
# Use durable queues in AMQP. If rabbit_quorum_queue is enabled,
# queues will be durable and this value will be ignored. (boolean
# value)
#amqp_durable_queues = false
# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false
# Size of RPC connection pool. (integer value)
# Minimum value: 1
#rpc_conn_pool_size = 30
# The pool size limit for connections expiration policy (integer
# value)
#conn_pool_min_size = 2
# The time-to-live in sec of idle connections in the pool (integer
# value)
#conn_pool_ttl = 1200
# Connect over SSL. (boolean value)
#ssl = false
# SSL version to use (valid only if SSL enabled). Valid values are
# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
# available on some distributions. (string value)
#ssl_version =
# SSL key file (valid only if SSL enabled). (string value)
#ssl_key_file =
# SSL cert file (valid only if SSL enabled). (string value)
#ssl_cert_file =
# SSL certification authority file (valid only if SSL enabled).
# (string value)
#ssl_ca_file =
# Global toggle for enforcing the OpenSSL FIPS mode. This feature
# requires Python support. This is available in Python 3.9 in all
# environments and may have been backported to older Python versions
# on select environments. If the Python executable used does not
# support OpenSSL FIPS mode, an exception will be raised. (boolean
# value)
#ssl_enforce_fips_mode = false
# DEPRECATED: (DEPRECATED) It is recommend not to use this option
# anymore. Run the health check heartbeat thread through a native
# python thread by default. If this option is equal to False then the
# health check heartbeat will inherit the execution model from the
# parent process. For example if the parent process has monkey patched
# the stdlib by using eventlet/greenlet then the heartbeat will be run
# through a green thread. This option should be set to True only for
# the wsgi services. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The option is related to Eventlet which will be removed. In
# addition this has never worked as expected with services using
# eventlet for core service framework.
#heartbeat_in_pthread = false
# How long to wait (in seconds) before reconnecting in response to an
# AMQP consumer cancel notification. (floating point value)
# Minimum value: 0.0
# Maximum value: 4.5
#kombu_reconnect_delay = 1.0
# Random time to wait for when reconnecting in response to an AMQP
# consumer cancel notification. (floating point value)
# Minimum value: 0.0
#kombu_reconnect_splay = 0.0
# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
# will not be used. This option may not be available in future
# versions. (string value)
#kombu_compression = <None>
# How long to wait a missing client before abandoning to send it its
# replies. This value should not be longer than rpc_response_timeout.
# (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60
# Determines how the next RabbitMQ node is chosen in case the one we
# are currently connected to becomes unavailable. Takes effect only if
# more than one RabbitMQ node is provided in config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin
# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# EXTERNAL - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN
# How frequently to retry connecting with RabbitMQ. (integer value)
# Minimum value: 1
#rabbit_retry_interval = 1
# How long to backoff for between retries when connecting to RabbitMQ.
# (integer value)
# Minimum value: 0
#rabbit_retry_backoff = 2
# Maximum interval of RabbitMQ connection retries. (integer value)
# Minimum value: 1
#rabbit_interval_max = 30
# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
# queue mirroring is no longer controlled by the x-ha-policy argument
# when declaring a queue. If you just want to make sure that all
# queues (except those with auto-generated names) are mirrored across
# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
# mode": "all"}' " (boolean value)
#rabbit_ha_queues = false
# Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum
# queue is a modern queue type for RabbitMQ implementing a durable,
# replicated FIFO queue based on the Raft consensus algorithm. It is
# available as of RabbitMQ 3.8.0. If set this option will conflict
# with the HA queues (``rabbit_ha_queues``) aka mirrored queues, in
# other words the HA queues should be disabled. Quorum queues are also
# durable by default so the amqp_durable_queues option is ignored when
# this option is enabled. (boolean value)
#rabbit_quorum_queue = false
# Use quorum queues for transients queues in RabbitMQ. Enabling this
# option will then make sure those queues are also using quorum kind
# of rabbit queues, which are HA by default. (boolean value)
#rabbit_transient_quorum_queue = false
# Each time a message is redelivered to a consumer, a counter is
# incremented. Once the redelivery count exceeds the delivery limit
# the message gets dropped or dead-lettered (if a DLX exchange has
# been configured) Used only when rabbit_quorum_queue is enabled,
# Default 0 which means dont set a limit. (integer value)
#rabbit_quorum_delivery_limit = 0
# By default all messages are maintained in memory if a quorum queue
# grows in length it can put memory pressure on a cluster. This option
# can limit the number of messages in the quorum queue. Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a
# limit. (integer value)
#rabbit_quorum_max_memory_length = 0
# By default all messages are maintained in memory if a quorum queue
# grows in length it can put memory pressure on a cluster. This option
# can limit the number of memory bytes used by the quorum queue. Used
# only when rabbit_quorum_queue is enabled, Default 0 which means dont
# set a limit. (integer value)
#rabbit_quorum_max_memory_bytes = 0
# Positive integer representing duration in seconds for queue TTL
# (x-expires). Queues which are unused for the duration of the TTL are
# automatically deleted. The parameter affects only reply and fanout
# queues. Setting 0 as value will disable the x-expires. If doing so,
# make sure you have a rabbitmq policy to delete the queues or you
# deployment will create an infinite number of queue over time.In case
# rabbit_stream_fanout is set to True, this option will control data
# retention policy (x-max-age) for messages in the fanout queue rather
# then the queue duration itself. So the oldest data in the stream
# queue will be discarded from it once reaching TTL Setting to 0 will
# disable x-max-age for stream which make stream grow indefinitely
# filling up the diskspace (integer value)
# Minimum value: 0
#rabbit_transient_queues_ttl = 1800
# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0
# Number of seconds after which the Rabbit broker is considered down
# if heartbeat's keep-alive fails (0 disables heartbeat). (integer
# value)
#heartbeat_timeout_threshold = 60
# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 3
# DEPRECATED: (DEPRECATED) Enable/Disable the RabbitMQ mandatory flag
# for direct send. The direct send is used as reply, so the
# MessageUndeliverable exception is raised in case the client queue
# does not exist.MessageUndeliverable exception will be used to loop
# for a timeout to lets a chance to sender to recover.This flag is
# deprecated and it will not be possible to deactivate this
# functionality anymore (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Mandatory flag no longer deactivable.
#direct_mandatory_flag = true
# Enable x-cancel-on-ha-failover flag so that rabbitmq server will
# cancel and notify consumerswhen queue is down (boolean value)
#enable_cancel_on_failover = false
# Should we use consistant queue names or random ones (boolean value)
#use_queue_manager = false
# Hostname used by queue manager. Defaults to the value returned by
# socket.gethostname(). (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#hostname = node1.example.com
# Process name used by queue manager (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#processname = nova-api
# Use stream queues in RabbitMQ (x-queue-type: stream). Streams are a
# new persistent and replicated data structure ("queue type") in
# RabbitMQ which models an append-only log with non-destructive
# consumer semantics. It is available as of RabbitMQ 3.9.0. If set
# this option will replace all fanout queues with only one stream
# queue. (boolean value)
#rabbit_stream_fanout = false
[oslo_policy]
#
# From oslo.policy
#
# DEPRECATED: This option controls whether or not to enforce scope
# when evaluating policies. If ``True``, the scope of the token used
# in the request is compared to the ``scope_types`` of the policy
# being enforced. If the scopes do not match, an ``InvalidScope``
# exception will be raised. If ``False``, a message will be logged
# informing operators that policies are being invoked with mismatching
# scope. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This configuration was added temporarily to facilitate a
# smooth transition to the new RBAC. OpenStack will always enforce
# scope checks. This configuration option is deprecated and will be
# removed in the 2025.2 cycle.
#enforce_scope = true
# This option controls whether or not to use old deprecated defaults
# when evaluating policies. If ``True``, the old deprecated defaults
# are not going to be evaluated. This means if any existing token is
# allowed for old defaults but is disallowed for new defaults, it will
# be disallowed. It is encouraged to enable this flag along with the
# ``enforce_scope`` flag so that you can get the benefits of new
# defaults and ``scope_type`` together. If ``False``, the deprecated
# policy check string is logically OR'd with the new policy check
# string, allowing for a graceful upgrade experience between releases
# with new policies, which is the default behavior. (boolean value)
#enforce_new_defaults = true
# The relative or absolute path of a file that maps roles to
# permissions for a given service. Relative paths must be specified in
# relation to the configuration file setting this option. (string
# value)
#policy_file = policy.yaml
# Default rule. Enforced when a requested rule is not found. (string
# value)
#policy_default_rule = default
# Directories where policy configuration files are stored. They can be
# relative to any directory in the search path defined by the
# config_dir option, or absolute paths. The file defined by
# policy_file must exist for these directories to be searched.
# Missing or empty directories are ignored. (multi valued)
#policy_dirs = policy.d
# Content Type to send and receive data for REST based policy check
# (string value)
# Possible values:
# application/x-www-form-urlencoded - <No description provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded
# server identity verification for REST based policy check (boolean
# value)
#remote_ssl_verify_server_crt = false
# Absolute path to ca cert file for REST based policy check (string
# value)
#remote_ssl_ca_crt_file = <None>
# Absolute path to client cert for REST based policy check (string
# value)
#remote_ssl_client_crt_file = <None>
# Absolute path client key file REST based policy check (string value)
#remote_ssl_client_key_file = <None>
# Timeout in seconds for REST based policy check (floating point
# value)
# Minimum value: 0
#remote_timeout = 60
[pci_devices]
#
# From ironic_inspector
#
# An alias for PCI device identified by 'vendor_id' and 'product_id'
# fields. Format: {"vendor_id": "1234", "product_id": "5678", "name":
# "pci_dev1"} (multi valued)
#alias =
[port_physnet]
#
# From ironic_inspector
#
# Mapping of IP subnet CIDR to physical network. When the
# physnet_cidr_map processing hook is enabled the physical_network
# property of baremetal ports is populated based on this mapping.
# (list value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#cidr_map = 10.10.10.0/24:physnet_a,2001:db8::/64:physnet_b
[processing]
#
# From ironic_inspector
#
# Which MAC addresses to add as ports during introspection. Possible
# values: all (all MAC addresses), active (MAC addresses of NIC with
# IP addresses), pxe (only MAC address of NIC node PXE booted from,
# falls back to "active" if PXE MAC is not supplied by the ramdisk).
# (string value)
# Possible values:
# all - <No description provided>
# active - <No description provided>
# pxe - <No description provided>
# disabled - <No description provided>
#add_ports = pxe
# Which ports (already present on a node) to keep after introspection.
# Possible values: all (do not delete anything), present (keep ports
# which MACs were present in introspection data), added (keep only
# MACs that we added during introspection). (string value)
# Possible values:
# all - <No description provided>
# present - <No description provided>
# added - <No description provided>
#keep_ports = all
# Whether to overwrite existing values in node database. Disable this
# option to make introspection a non-destructive operation. (boolean
# value)
#overwrite_existing = true
# Comma-separated list of default hooks for processing pipeline. Hook
# 'scheduler' updates the node with the minimum properties required by
# the Nova scheduler. Hook 'validate_interfaces' ensures that valid
# NIC data was provided by the ramdisk. Do not exclude these two
# unless you really know what you're doing. (string value)
#default_processing_hooks = ramdisk_error,root_disk_selection,scheduler,validate_interfaces,capabilities,pci_devices
# Comma-separated list of enabled hooks for processing pipeline. The
# default for this is $default_processing_hooks, hooks can be added
# before or after the defaults like this:
# "prehook,$default_processing_hooks,posthook". (string value)
#processing_hooks = $default_processing_hooks
# If set, logs from ramdisk will be stored in this directory. (string
# value)
#ramdisk_logs_dir = <None>
# Whether to store ramdisk logs even if it did not return an error
# message (dependent upon "ramdisk_logs_dir" option being set).
# (boolean value)
#always_store_ramdisk_logs = false
# The name of the hook to run when inspector receives inspection
# information from a node it isn't already aware of. This hook is
# ignored by default. (string value)
#node_not_found_hook = <None>
# The storage backend for storing introspection data. Possible values
# are: 'none', 'database' and 'swift'. If set to 'none', introspection
# data will not be stored. (string value)
#store_data = none
# Whether to leave 1 GiB of disk size untouched for partitioning. Only
# has effect when used with the IPA as a ramdisk, for older ramdisk
# local_gb is calculated on the ramdisk side. (boolean value)
#disk_partitioning_spacing = true
# File name template for storing ramdisk logs. The following
# replacements can be used: {uuid} - node UUID or "unknown", {bmc} -
# node BMC address or "unknown", {dt} - current UTC date and time,
# {mac} - PXE booting MAC or "unknown". (string value)
#ramdisk_logs_filename_format = {uuid}_{dt:%Y%m%d-%H%M%S.%f}.tar.gz
# Whether to power off a node after introspection. Nodes in active or
# rescue states which submit introspection data will be left on if the
# feature is enabled via the 'permit_active_introspection'
# configuration option. (boolean value)
#power_off = true
# Whether to process nodes that are in running states. (boolean value)
#permit_active_introspection = false
# Whether to update the pxe_enabled value according to the
# introspection data. This option has no effect if
# [processing]overwrite_existing is set to False (boolean value)
#update_pxe_enabled = true
[pxe_filter]
#
# From ironic_inspector
#
# PXE boot filter driver to use, possible filters are: "iptables",
# "dnsmasq" and "noop". Set "noop " to disable the firewall filtering.
# (string value)
#driver = iptables
# Amount of time in seconds, after which repeat periodic update of the
# filter. (integer value)
# Minimum value: 0
#sync_period = 15
# By default inspector will open the DHCP server for any node when
# introspection is active. Opening DHCP for unknown MAC addresses when
# introspection is active allow for users to add nodes with no ports
# to ironic and have ironic-inspector enroll ports based on node
# introspection results. NOTE: If this option is True, nodes must have
# at least one enrolled port prior to introspection. (boolean value)
#deny_unknown_macs = false
[service_catalog]
#
# From ironic_inspector
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [service_catalog]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying HTTPs
# connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection errors. If not
# set, exponential retry starting with 0.5 seconds up to a maximum of
# 60 seconds is used. (floating point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters. It will
# be used for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client. NOTE: The
# unversioned endpoint should be specified here; to request a
# particular API version, use the `version`, `min-version`, and/or
# `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be used as the
# upper bound of a range with min_version. Mutually exclusive with
# version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be used as the
# lower bound of a range with max_version. Mutually exclusive with
# version. If min_version is given with no max_version it is as if max
# version is "latest". (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [service_catalog]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [service_catalog]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string value)
#region_name = <None>
# List of retriable HTTP status codes that should be retried. If not
# set default to [503] (list value)
#retriable_status_codes = <None>
# The default service_name for endpoint URL discovery. (string value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string value)
#service_type = baremetal-introspection
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for retriable
# HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status codes.
# If not set, exponential retry starting with 0.5 seconds up to a
# maximum of 60 seconds is used. (floating point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [service_catalog]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint URL. (list
# value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version for
# endpoint URL discovery. Mutually exclusive with min_version and
# max_version (string value)
#version = <None>
[ssl]
#
# From oslo.service.sslutils
#
# DEPRECATED: CA certificate file to use to verify connecting clients.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'ca_file' option is deprecated and will be removed in a
# future release.
#ca_file = <None>
# DEPRECATED: Certificate file to use when starting the server
# securely. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'cert_file' option is deprecated and will be removed in
# a future release.
#cert_file = <None>
# DEPRECATED: Private key file to use when starting the server
# securely. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'key_file' option is deprecated and will be removed in a
# future release.
#key_file = <None>
# DEPRECATED: SSL version to use (valid only if SSL enabled). Valid
# values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may
# be available on some distributions. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'version' option is deprecated and will be removed in a
# future release.
#version = <None>
# DEPRECATED: Sets the list of available ciphers. value should be a
# string in the OpenSSL cipher list format. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'ciphers' option is deprecated and will be removed in a
# future release.
#ciphers = <None>
[swift]
#
# From ironic_inspector
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [swift]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying HTTPs
# connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection errors. If not
# set, exponential retry starting with 0.5 seconds up to a maximum of
# 60 seconds is used. (floating point value)
#connect_retry_delay = <None>
# Default Swift container to use when creating objects. (string value)
#container = ironic-inspector
# Optional domain ID to use with v3 and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters. It will
# be used for both the user and project domain in v3 and ignored in v2
# authentication. (string value)
#default_domain_name = <None>
# Number of seconds that the Swift object will last before being
# deleted. (set to 0 to never delete the object). (integer value)
#delete_after = 0
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client. NOTE: The
# unversioned endpoint should be specified here; to request a
# particular API version, use the `version`, `min-version`, and/or
# `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be used as the
# upper bound of a range with min_version. Mutually exclusive with
# version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be used as the
# lower bound of a range with max_version. Mutually exclusive with
# version. If min_version is given with no max_version it is as if max
# version is "latest". (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [swift]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [swift]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string value)
#region_name = <None>
# List of retriable HTTP status codes that should be retried. If not
# set default to [503] (list value)
#retriable_status_codes = <None>
# The default service_name for endpoint URL discovery. (string value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string value)
#service_type = object-store
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for retriable
# HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status codes.
# If not set, exponential retry starting with 0.5 seconds up to a
# maximum of 60 seconds is used. (floating point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [swift]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint URL. (list
# value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version for
# endpoint URL discovery. Mutually exclusive with min_version and
# max_version (string value)
#version = <None>
