Magnum 配置选项

以下是一个 Magnum 示例配置，用于调整和使用。它是由 Magnum 在构建此文档时自动生成的，因此如果您在使用某个选项时遇到问题，请将您的 Magnum 版本与此文档的版本进行比较。

示例配置也可以在 文件 形式 中查看。

[DEFAULT]

#
# From magnum.conf
#

# Directory where the magnum python module is installed. (string value)
#pybasedir = /home/zuul/src/opendev.org/openstack/magnum/magnum

# Directory where magnum binaries are installed. (string value)
#bindir = $pybasedir/bin

# Top-level directory for maintaining magnum's state. (string value)
#state_path = $pybasedir

# Enable periodic tasks. (boolean value)
#periodic_enable = true

# Max interval size between periodic tasks execution in seconds. (integer
# value)
#periodic_interval_max = 60

# Name of this node. This can be an opaque identifier. It is not necessarily a
# hostname, FQDN, or IP address. However, the node name must be valid within an
# AMQP key. (host address value)
#host = <None>

# Path to the rootwrap configuration file to use for running commands as root.
# (string value)
#rootwrap_config = /etc/magnum/rootwrap.conf

# Explicitly specify the temporary working directory. (string value)
#tempdir = <None>

# Symbols to use for passwords (list value)
#password_symbols = 23456789,ABCDEFGHJKLMNPQRSTUVWXYZ,abcdefghijkmnopqrstuvwxyz

# Max interval size between periodic tasks execution in seconds. (integer
# value)
#service_down_time = 180

# Maximum raw byte size of any manifest. (integer value)
#max_manifest_size = 524288

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, log-date-format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>

# DEPRECATED: Uses logging handler designed to watch file system. When log file
# is moved or removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This function is known to have bene broken for long time, and depends
# on the unmaintained library
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false

# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol
# which includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false

# (Optional) Set the 'color' key according to log levels. This option takes
# effect only when logging to stderr or stdout is used. This option is ignored
# if log_config_append is set. (boolean value)
#log_color = false

# The amount of time before the log files are rotated. This option is ignored
# unless log_rotation_type is set to "interval". (integer value)
#log_rotate_interval = 1

# Rotation interval type. The time of the last file change (or the time when
# the service was started) is used when scheduling the next rotation. (string
# value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days

# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30

# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
# not set to "size". (integer value)
#max_logfile_size_mb = 200

# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none

# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message
# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_user_identity_format = %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0

# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0

# Log level name used by rate limiting. Logs with level greater or equal to
# rate_limit_except_level are not filtered. An empty string means that all
# levels are filtered. (string value)
# Possible values:
# CRITICAL - <No description provided>
# ERROR - <No description provided>
# INFO - <No description provided>
# WARNING - <No description provided>
# DEBUG - <No description provided>
# '' - <No description provided>
#rate_limit_except_level = CRITICAL

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false

#
# From oslo.messaging
#

# Size of executor thread pool when executor is threading or eventlet. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# The network address and optional user credentials for connecting to the
# messaging backend, in URL format. The expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the documentation of
# oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/2025.2/reference/transport.html
# (string value)
#transport_url = rabbit://

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack

# Add an endpoint to answer to ping calls. Endpoint is named
# oslo_rpc_server_ping (boolean value)
#rpc_ping_enabled = false

#
# From oslo.service.periodic_task
#

# Some periodic tasks can be run in a separate process. Should we run them
# here? (boolean value)
#run_external_periodic_tasks = true

#
# From oslo.service.service
#

# DEPRECATED: Enable eventlet backdoor.  Acceptable values are 0, <port>, and
# <start>:<end>, where 0 results in listening on a random tcp port number;
# <port> results in listening on the specified port number (and not enabling
# backdoor if that port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range of port numbers.
# The chosen port is displayed in the service's log file. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'backdoor_port' option is deprecated and will be removed in a
# future release.
#backdoor_port = <None>

# DEPRECATED: Enable eventlet backdoor, using the provided path as a unix
# socket that can receive connections. This option is mutually exclusive with
# 'backdoor_port' in that only one should be provided. If both are provided
# then the existence of this option overrides the usage of that option. Inside
# the path {pid} will be replaced with the PID of the current process. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The 'backdoor_socket' option is deprecated and will be removed in a
# future release.
#backdoor_socket = <None>

# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true

# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60


[api]

#
# From magnum.conf
#

# The port for the Magnum API server. (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 9511

# The listen IP for the Magnum API server. (IP address value)
#host = 127.0.0.1

# The maximum number of items returned in a single response from a collection
# resource. (integer value)
#max_limit = 1000

# Configuration file for WSGI definition of API. (string value)
#api_paste_config = api-paste.ini

# This option allows setting path to the SSL certificate of API server. (string
# value)
#ssl_cert_file = <None>

# This option specifies the path to the file where SSL private key of API
# server is stored when SSL is in effect. (string value)
#ssl_key_file = <None>

# Enable SSL Magnum API service (boolean value)
#enabled_ssl = false

# The maximum number of magnum-api processes to fork and run. Default to number
# of CPUs on the host. (integer value)
#workers = <None>


[barbican_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL


[certificates]

#
# From magnum.conf
#

# Certificate Manager plugin. (string value)
#cert_manager_type = barbican

# Absolute path of the certificate storage directory. (string value)
#storage_path = /var/lib/magnum/certificates/


[cinder]

#
# From magnum.conf
#

# The default docker volume_type to use for volumes used for docker storage. To
# use the cinder volumes for docker storage, you need to select a default
# value. Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_docker_volume_type =

# The default etcd volume_type to use for volumes used for etcd storage. To use
# the cinder volumes for etcd storage, you need to select a default value.
# Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_etcd_volume_type =

# The default boot volume_type to use for volumes used for VM of COE. To use
# the cinder volumes for VM of COE, you need to select a default value.
# Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_boot_volume_type =

# The default volume size to use for volumes used for VM of COE. (integer
# value)
#default_boot_volume_size = 0


[cinder_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Version of Cinder API to use in cinderclient. (string value)
#api_version = 3


[cluster]

#
# From magnum.conf
#

# Url for etcd public discovery endpoint. (string value)
#etcd_discovery_service_endpoint_format = https://discovery.etcd.io/new?size=%(size)d

# Affinity policy for server group of cluster nodes. Possible values include
# "affinity", "anti-affinity", "soft-affinity" and "soft-anti-affinity".
# (string value)
#nodes_affinity_policy = soft-anti-affinity

# Explicitly specify the temporary directory to hold cached TLS certs. (string
# value)
#temp_cache_dir = /var/lib/magnum/certificate-cache

# The timeout in seconds to wait for the load balancers to be deleted. (integer
# value)
#pre_delete_lb_timeout = 60


[cluster_heat]

#
# From magnum.conf
#

# Number of attempts to query the Heat stack for finding out the status of the
# created stack and getting template outputs.  This value is ignored during
# cluster creation if timeout is set as the poll will continue until cluster
# creation either ends or times out. (integer value)
#max_attempts = 2000

# Sleep time interval between two attempts of querying the Heat stack.  This
# interval is in seconds. (integer value)
#wait_interval = 1

# The length of time to let cluster creation continue. This interval is in
# minutes. The default is 60 minutes. (integer value)
#create_timeout = 60


[cluster_template]

#
# From magnum.conf
#

# Allowed network drivers for kubernetes. (list value)
#kubernetes_allowed_network_drivers = flannel,calico

# Default network driver for kubernetes cluster-templates. (string value)
#kubernetes_default_network_driver = flannel


[conductor]

#
# From magnum.conf
#

# The queue to add conductor tasks to. (string value)
#topic = magnum-conductor

# Number of magnum-conductor processes to fork and run. Default to number of
# CPUs on the host. (integer value)
#workers = <None>


[cors]

#
# From oslo.middleware.cors
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers =

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers =


[database]

#
# From magnum.conf
#

# MySQL engine to use. (string value)
#mysql_engine = InnoDB

#
# From oslo.db
#

# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true

# The back end to use for the database. (string value)
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQLAlchemy asyncio connection string to use to connect to the database.
# (string value)
#asyncio_connection = <None>

# The SQLAlchemy asyncio connection string to use to connect to the slave
# database. (string value)
#asyncio_slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# For Galera only, configure wsrep_sync_wait causality checks on new
# connections.  Default is None, meaning don't configure any setting. (integer
# value)
#mysql_wsrep_sync_wait = <None>

# Connections which have been present in the connection pool longer than this
# number of seconds will be replaced with a new one the next time they are
# checked out from the pool. (integer value)
#connection_recycle_time = 3600

# Maximum number of SQL connections to keep open in a pool. Setting a value of
# 0 indicates no limit. (integer value)
#max_pool_size = 5

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20

# Optional URL parameters to append onto the connection URL at connect time;
# specify as param1=value1&param2=value2&... (string value)
#connection_parameters =


[docker]

#
# From magnum.conf
#

# Docker remote api version. Override it according to specific docker api
# version in your environment. (string value)
#docker_remote_api_version = 1.21

# Default timeout in seconds for docker client operations. (integer value)
#default_timeout = 60

# If set, ignore any SSL validation issues (boolean value)
#api_insecure = false

# Location of CA certificates file for securing docker api requests
# (tlscacert). (string value)
#ca_file = <None>

# Location of TLS certificate file for securing docker api requests (tlscert).
# (string value)
#cert_file = <None>

# Location of TLS private key file for securing docker api requests (tlskey).
# (string value)
#key_file = <None>


[docker_registry]

#
# From magnum.conf
#

# Region name of Swift (string value)
#swift_region = <None>

# Name of the container in Swift which docker registry stores images in (string
# value)
#swift_registry_container = docker_registry


[drivers]

#
# From magnum.conf
#

# Indicates whether the cluster nodes validate the Certificate Authority when
# making requests to the OpenStack APIs (Keystone, Magnum, Heat). If you have
# self-signed certificates for the OpenStack APIs or you have your own
# Certificate Authority and you have not installed the Certificate Authority to
# all nodes, you may need to disable CA validation by setting this flag to
# False. (boolean value)
#verify_ca = true

# Path to the OpenStack CA-bundle file to pass and install in all cluster
# nodes. (string value)
#openstack_ca_file =

# Disabled driver entry points. If empty, then all available drivers are
# enabled. (list value)
#disabled_drivers =

# List of beta drivers to enable. Beta drivers are not intended for production.
# (list value)
#enabled_beta_drivers =


[glance_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Version of Glance API to use in glanceclient. (string value)
#api_version = 2

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[heat_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Version of Heat API to use in heatclient. (string value)
#api_version = 1

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[keystone_auth]

#
# From magnum.conf
#

# Authentication type to load (string value)
# Deprecated group/name - [keystone_auth]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>

# Authentication URL (string value)
#auth_url = <None>

# Scope for system operations (string value)
#system_scope = <None>

# Domain ID to scope to (string value)
#domain_id = <None>

# Domain name to scope to (string value)
#domain_name = <None>

# Project ID to scope to (string value)
# Deprecated group/name - [keystone_auth]/tenant_id
#project_id = <None>

# Project name to scope to (string value)
# Deprecated group/name - [keystone_auth]/tenant_name
#project_name = <None>

# Domain ID containing project (string value)
#project_domain_id = <None>

# Domain name containing project (string value)
#project_domain_name = <None>

# ID of the trust to use as a trustee use (string value)
#trust_id = <None>

# Optional domain ID to use with v3 and v2 parameters. It will be used for both
# the user and project domain in v3 and ignored in v2 authentication. (string
# value)
#default_domain_id = <None>

# Optional domain name to use with v3 API and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2 authentication.
# (string value)
#default_domain_name = <None>

# User id (string value)
#user_id = <None>

# Username (string value)
# Deprecated group/name - [keystone_auth]/user_name
#username = <None>

# User's domain id (string value)
#user_domain_id = <None>

# User's domain name (string value)
#user_domain_name = <None>

# User's password (string value)
#password = <None>


[keystone_authtoken]

#
# From keystonemiddleware.auth_token
#

# Complete "public" Identity API endpoint. This endpoint should not be an
# "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to authenticate.
# Although this endpoint should ideally be unversioned, client support in the
# wild varies. If you're using a versioned v2 endpoint here, then this should
# *not* be the same endpoint the service user utilizes for validating tokens,
# because normal end users may not be able to reach that endpoint. (string
# value)
# Deprecated group/name - [keystone_authtoken]/auth_uri
#www_authenticate_uri = <None>

# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
# be an "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to authenticate.
# Although this endpoint should ideally be unversioned, client support in the
# wild varies. If you're using a versioned v2 endpoint here, then this should
# *not* be the same endpoint the service user utilizes for validating tokens,
# because normal end users may not be able to reach that endpoint. This option
# is deprecated in favor of www_authenticate_uri and will be removed in the S
# release. (string value)
# This option is deprecated for removal since Queens.
# Its value may be silently ignored in the future.
# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
# and will be removed in the S  release.
#auth_uri = <None>

# API version of the Identity API endpoint. (string value)
#auth_version = <None>

# Interface to use for the Identity API endpoint. Valid values are "public",
# "internal" (default) or "admin". (string value)
#interface = internal

# Do not handle authorization requests within the middleware, but delegate the
# authorization decision to downstream WSGI components. (boolean value)
#delay_auth_decision = false

# Request timeout value for communicating with Identity API server. (integer
# value)
#http_connect_timeout = <None>

# How many times are we trying to reconnect when communicating with Identity
# API Server. (integer value)
#http_request_max_retries = 3

# Request environment key where the Swift cache object is stored. When
# auth_token middleware is deployed with a Swift cache, use this option to have
# the middleware share a caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
#cache = <None>

# Required if identity server requires client certificate (string value)
#certfile = <None>

# Required if identity server requires client certificate (string value)
#keyfile = <None>

# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
# Defaults to system CAs. (string value)
#cafile = <None>

# Verify HTTPS connections. (boolean value)
#insecure = false

# The region in which the identity server can be found. (string value)
#region_name = <None>

# Optionally specify a list of memcached server(s) to use for caching. If left
# undefined, tokens will instead be cached in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>

# In order to prevent excessive effort spent validating tokens, the middleware
# caches previously-seen tokens for a configurable duration (in seconds). Set
# to -1 to disable caching completely. (integer value)
#token_cache_time = 300

# (Optional) If defined, indicate whether token data should be authenticated or
# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will
# raise an exception on initialization. (string value)
# Possible values:
# None - <No description provided>
# MAC - <No description provided>
# ENCRYPT - <No description provided>
#memcache_security_strategy = None

# (Optional, mandatory if memcache_security_strategy is defined) This string is
# used for key derivation. (string value)
#memcache_secret_key = <None>

# (Optional) Global toggle for TLS usage when comunicating with the caching
# servers. (boolean value)
#memcache_tls_enabled = false

# (Optional) Path to a file of concatenated CA certificates in PEM format
# necessary to establish the caching server's authenticity. If tls_enabled is
# False, this option is ignored. (string value)
#memcache_tls_cafile = <None>

# (Optional) Path to a single file in PEM format containing the client's
# certificate as well as any number of CA certificates needed to establish the
# certificate's authenticity. This file is only required when client side
# authentication is necessary. If tls_enabled is False, this option is ignored.
# (string value)
#memcache_tls_certfile = <None>

# (Optional) Path to a single file containing the client's private key in.
# Otherwhise the private key will be taken from the file specified in
# tls_certfile. If tls_enabled is False, this option is ignored. (string value)
#memcache_tls_keyfile = <None>

# (Optional) Set the available ciphers for sockets created with the TLS
# context. It should be a string in the OpenSSL cipher list format. If not
# specified, all OpenSSL enabled ciphers will be available. (string value)
#memcache_tls_allowed_ciphers = <None>

# (Optional) Number of seconds memcached server is considered dead before it is
# tried again. (integer value)
#memcache_pool_dead_retry = 300

# (Optional) Maximum total number of open connections to every memcached
# server. (integer value)
#memcache_pool_maxsize = 10

# (Optional) Socket timeout in seconds for communicating with a memcached
# server. (integer value)
#memcache_pool_socket_timeout = 3

# (Optional) Number of seconds a connection to memcached is held unused in the
# pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60

# (Optional) Number of seconds that an operation will wait to get a memcached
# client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10

# (Optional) Use the advanced (eventlet safe) memcached client pool. (boolean
# value)
#memcache_use_advanced_pool = true

# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
# middleware will not ask for service catalog on token validation and will not
# set the X-Service-Catalog header. (boolean value)
#include_service_catalog = true

# Used to control the use and type of token binding. Can be set to: "disabled"
# to not check token binding. "permissive" (default) to validate binding
# information if the bind type is of a form known to the server and ignore it
# if not. "strict" like "permissive" but if the bind type is unknown the token
# will be rejected. "required" any form of token binding is needed to be
# allowed. Finally the name of a binding method that must be present in tokens.
# (string value)
#enforce_token_bind = permissive

# A choice of roles that must be present in a service token. Service tokens are
# allowed to request that an expired token can be used and so this check should
# tightly control that only actual services should be sending this token. Roles
# here are applied as an ANY check so any role in this list must be present.
# For backwards compatibility reasons this currently only affects the
# allow_expired check. (list value)
#service_token_roles = service

# For backwards compatibility reasons we must let valid service tokens pass
# that don't pass the service_token_roles check as valid. Setting this true
# will become the default in a future release and should be enabled if
# possible. (boolean value)
#service_token_roles_required = false

# The name or type of the service as it appears in the service catalog. This is
# used to validate tokens that have restricted access rules. (string value)
#service_type = <None>

# Enable the SASL(Simple Authentication and Security Layer) if the SASL_enable
# is true, else disable. (boolean value)
#memcache_sasl_enabled = false

# the user name for the SASL (string value)
#memcache_username =

# the username password for SASL (string value)
#memcache_password =

# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>


[kubernetes]

#
# From magnum.conf
#

# Explicitly specify the path to the file defined default Keystone auth policy
# for Kubernetes cluster when the Keystone auth is enabled. Vendors can put
# their specific default policy here (string value)
#keystone_auth_default_policy = /etc/magnum/keystone_auth_default_policy.json

# An URL of the manifest file will be installed after the Kubernetes cluster
# created. For exmaple, this could be a file including the vendor specific
# storage class. (string value)
#post_install_manifest_url =

# The default polling interval for Kubernetes cluster health. If this number is
# negative the periodic task will be disabled. (integer value)
#health_polling_interval = 60


[magnum_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL


[neutron_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[nova_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Version of Nova API to use in novaclient. (string value)
#api_version = 2

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[octavia_client]

#
# From magnum.conf
#

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[oslo_concurrency]

#
# From oslo.concurrency
#

# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false

# Directory to use for lock files.  For security, the specified directory
# should only be writable by the user running the processes that need locking.
# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
# a lock path must be set. (string value)
#lock_path = <None>


[oslo_messaging_kafka]

#
# From oslo.messaging
#

# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576

# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0

# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer

# Upper bound on the delay for KafkaProducer batching in seconds (floating
# point value)
#producer_batch_timeout = 0.0

# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384

# The compression codec for all data generated by the producer. If not set,
# compression will not be used. Note that the allowed values of this depend on
# the kafka version (string value)
# Possible values:
# none - <No description provided>
# gzip - <No description provided>
# snappy - <No description provided>
# lz4 - <No description provided>
# zstd - <No description provided>
#compression_codec = none

# Enable asynchronous consumer commits (boolean value)
#enable_auto_commit = false

# The maximum number of records returned in a poll call (integer value)
#max_poll_records = 500

# Protocol used to communicate with brokers (string value)
# Possible values:
# PLAINTEXT - <No description provided>
# SASL_PLAINTEXT - <No description provided>
# SSL - <No description provided>
# SASL_SSL - <No description provided>
#security_protocol = PLAINTEXT

# Mechanism when security protocol is SASL (string value)
#sasl_mechanism = PLAIN

# CA certificate PEM file used to verify the server certificate (string value)
#ssl_cafile =

# Client certificate PEM file used for authentication. (string value)
#ssl_client_cert_file =

# Client key PEM file used for authentication. (string value)
#ssl_client_key_file =

# Client key password file used for authentication. (string value)
#ssl_client_key_password =


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
#topics = notifications

# The maximum number of attempts to re-send a notification message which failed
# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
# (integer value)
#retry = -1


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be
# durable and this value will be ignored. (boolean value)
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false

# Size of RPC connection pool. (integer value)
# Minimum value: 1
#rpc_conn_pool_size = 30

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# Connect over SSL. (boolean value)
#ssl = false

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
#ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
#ssl_key_file =

# SSL cert file (valid only if SSL enabled). (string value)
#ssl_cert_file =

# SSL certification authority file (valid only if SSL enabled). (string value)
#ssl_ca_file =

# Global toggle for enforcing the OpenSSL FIPS mode. This feature requires
# Python support. This is available in Python 3.9 in all environments and may
# have been backported to older Python versions on select environments. If the
# Python executable used does not support OpenSSL FIPS mode, an exception will
# be raised. (boolean value)
#ssl_enforce_fips_mode = false

# DEPRECATED: (DEPRECATED) It is recommend not to use this option anymore. Run
# the health check heartbeat thread through a native python thread by default.
# If this option is equal to False then the health check heartbeat will inherit
# the execution model from the parent process. For example if the parent
# process has monkey patched the stdlib by using eventlet/greenlet then the
# heartbeat will be run through a green thread. This option should be set to
# True only for the wsgi services. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The option is related to Eventlet which will be removed. In addition
# this has never worked as expected with services using eventlet for core
# service framework.
#heartbeat_in_pthread = false

# How long to wait (in seconds) before reconnecting in response to an AMQP
# consumer cancel notification. (floating point value)
# Minimum value: 0.0
# Maximum value: 4.5
#kombu_reconnect_delay = 1.0

# Random time to wait for when reconnecting in response to an AMQP consumer
# cancel notification. (floating point value)
# Minimum value: 0.0
#kombu_reconnect_splay = 0.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin

# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# EXTERNAL - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN

# How frequently to retry connecting with RabbitMQ. (integer value)
# Minimum value: 1
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
# Minimum value: 0
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. (integer value)
# Minimum value: 1
#rabbit_interval_max = 30

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
#rabbit_ha_queues = false

# Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a
# modern queue type for RabbitMQ implementing a durable, replicated FIFO queue
# based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0.
# If set this option will conflict with the HA queues (``rabbit_ha_queues``)
# aka mirrored queues, in other words the HA queues should be disabled. Quorum
# queues are also durable by default so the amqp_durable_queues option is
# ignored when this option is enabled. (boolean value)
#rabbit_quorum_queue = false

# Use quorum queues for transients queues in RabbitMQ. Enabling this option
# will then make sure those queues are also using quorum kind of rabbit queues,
# which are HA by default. (boolean value)
#rabbit_transient_quorum_queue = false

# Each time a message is redelivered to a consumer, a counter is incremented.
# Once the redelivery count exceeds the delivery limit the message gets dropped
# or dead-lettered (if a DLX exchange has been configured) Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
#rabbit_quorum_delivery_limit = 0

# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of messages in the quorum queue. Used only when rabbit_quorum_queue is
# enabled, Default 0 which means dont set a limit. (integer value)
#rabbit_quorum_max_memory_length = 0

# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of memory bytes used by the quorum queue. Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
#rabbit_quorum_max_memory_bytes = 0

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. Setting 0 as
# value will disable the x-expires. If doing so, make sure you have a rabbitmq
# policy to delete the queues or you deployment will create an infinite number
# of queue over time.In case rabbit_stream_fanout is set to True, this option
# will control data retention policy (x-max-age) for messages in the fanout
# queue rather then the queue duration itself. So the oldest data in the stream
# queue will be discarded from it once reaching TTL Setting to 0 will disable
# x-max-age for stream which make stream grow indefinitely filling up the
# diskspace (integer value)
# Minimum value: 0
#rabbit_transient_queues_ttl = 1800

# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disables heartbeat). (integer value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 3

# DEPRECATED: (DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for
# direct send. The direct send is used as reply, so the MessageUndeliverable
# exception is raised in case the client queue does not
# exist.MessageUndeliverable exception will be used to loop for a timeout to
# lets a chance to sender to recover.This flag is deprecated and it will not be
# possible to deactivate this functionality anymore (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Mandatory flag no longer deactivable.
#direct_mandatory_flag = true

# Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and
# notify consumerswhen queue is down (boolean value)
#enable_cancel_on_failover = false

# Should we use consistant queue names or random ones (boolean value)
#use_queue_manager = false

# Hostname used by queue manager. Defaults to the value returned by
# socket.gethostname(). (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#hostname = node1.example.com

# Process name used by queue manager (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#processname = nova-api

# Use stream queues in RabbitMQ (x-queue-type: stream). Streams are a new
# persistent and replicated data structure ("queue type") in RabbitMQ which
# models an append-only log with non-destructive consumer semantics. It is
# available as of RabbitMQ 3.9.0. If set this option will replace all fanout
# queues with only one stream queue. (boolean value)
#rabbit_stream_fanout = false


[oslo_policy]

#
# From oslo.policy
#

# DEPRECATED: This option controls whether or not to enforce scope when
# evaluating policies. If ``True``, the scope of the token used in the request
# is compared to the ``scope_types`` of the policy being enforced. If the
# scopes do not match, an ``InvalidScope`` exception will be raised. If
# ``False``, a message will be logged informing operators that policies are
# being invoked with mismatching scope. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This configuration was added temporarily to facilitate a smooth
# transition to the new RBAC. OpenStack will always enforce scope checks. This
# configuration option is deprecated and will be removed in the 2025.2 cycle.
#enforce_scope = true

# This option controls whether or not to use old deprecated defaults when
# evaluating policies. If ``True``, the old deprecated defaults are not going
# to be evaluated. This means if any existing token is allowed for old defaults
# but is disallowed for new defaults, it will be disallowed. It is encouraged
# to enable this flag along with the ``enforce_scope`` flag so that you can get
# the benefits of new defaults and ``scope_type`` together. If ``False``, the
# deprecated policy check string is logically OR'd with the new policy check
# string, allowing for a graceful upgrade experience between releases with new
# policies, which is the default behavior. (boolean value)
#enforce_new_defaults = true

# The relative or absolute path of a file that maps roles to permissions for a
# given service. Relative paths must be specified in relation to the
# configuration file setting this option. (string value)
#policy_file = policy.yaml

# Default rule. Enforced when a requested rule is not found. (string value)
#policy_default_rule = default

# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched.  Missing or empty directories are ignored. (multi
# valued)
#policy_dirs = policy.d

# Content Type to send and receive data for REST based policy check (string
# value)
# Possible values:
# application/x-www-form-urlencoded - <No description provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded

# server identity verification for REST based policy check (boolean value)
#remote_ssl_verify_server_crt = false

# Absolute path to ca cert file for REST based policy check (string value)
#remote_ssl_ca_crt_file = <None>

# Absolute path to client cert for REST based policy check (string value)
#remote_ssl_client_crt_file = <None>

# Absolute path client key file REST based policy check (string value)
#remote_ssl_client_key_file = <None>

# Timeout in seconds for REST based policy check (floating point value)
# Minimum value: 0
#remote_timeout = 60


[oslo_reports]

#
# From oslo.reports
#

# Path to a log directory where to create a file (string value)
#log_dir = <None>

# The path to a file to watch for changes to trigger the reports, instead of
# signals. Setting this option disables the signal trigger for the reports. If
# application is running as a WSGI application it is recommended to use this
# instead of signals. (string value)
#file_event_handler = <None>

# How many seconds to wait between polls when file_event_handler is set
# (integer value)
#file_event_handler_interval = 1


[oslo_versionedobjects]

#
# From oslo.versionedobjects
#

# Make exception message format errors fatal (boolean value)
#fatal_exception_format_errors = false


[profiler]
#
# OSprofiler library allows to trace requests going through various OpenStack
# services and create the accumulated report of what time was spent on each
# request processing step.

#
# From magnum.conf
#

#
# Enable the profiling for all services on this node.
#
# Default value is False (fully disable the profiling feature).
#
# Possible values:
#
# * True: Enables the feature
# * False: Disables the feature. The profiling cannot be started via this
# project
#   operations. If the profiling is triggered by another project, this project
#   part will be empty.
#  (boolean value)
# Deprecated group/name - [profiler]/profiler_enabled
#enabled = false

#
# Enable SQL requests profiling in services.
#
# Default value is False (SQL requests won't be traced).
#
# Possible values:
#
# * True: Enables SQL requests profiling. Each SQL query will be part of the
#   trace and can the be analyzed by how much time was spent for that.
# * False: Disables SQL requests profiling. The spent time is only shown on a
#   higher level of operations. Single SQL queries cannot be analyzed this way.
#  (boolean value)
#trace_sqlalchemy = false

#
# Enable python requests package profiling.
#
# Supported drivers: jaeger+otlp
#
# Default value is False.
#
# Possible values:
#
# * True: Enables requests profiling.
# * False: Disables requests profiling.
#  (boolean value)
#trace_requests = false

#
# Secret key(s) to use for encrypting context data for performance profiling.
#
# This string value should have the following format:
# <key1>[,<key2>,...<keyn>],
# where each key is some random string. A user who triggers the profiling via
# the REST API has to set one of these keys in the headers of the REST API call
# to include profiling results of this node for this particular project.
#
# Both "enabled" flag and "hmac_keys" config options should be set to enable
# profiling. Also, to generate correct profiling information across all
# services
# at least one key needs to be consistent between OpenStack projects. This
# ensures it can be used from client side to generate the trace, containing
# information from all possible resources.
#  (string value)
#hmac_keys = SECRET_KEY

#
# Connection string for a notifier backend.
#
# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
#
# Examples of possible values:
#
# * ``messaging://`` - use oslo_messaging driver for sending spans.
# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
#   spans.
# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
# spans.
#  (string value)
#connection_string = messaging://

#
# Document type for notification indexing in elasticsearch.
#  (string value)
#es_doc_type = notification

#
# This parameter is a time value parameter (for example: es_scroll_time=2m),
# indicating for how long the nodes that participate in the search will
# maintain
# relevant resources in order to continue and support it.
#  (string value)
#es_scroll_time = 2m

#
# Elasticsearch splits large requests in batches. This parameter defines
# maximum size of each batch (for example: es_scroll_size=10000).
#  (integer value)
#es_scroll_size = 10000

#
# Redissentinel provides a timeout option on the connections.
# This parameter defines that timeout (for example: socket_timeout=0.1).
#  (floating point value)
#socket_timeout = 0.1

#
# Redissentinel uses a service name to identify a master redis service.
# This parameter defines the name (for example:
# ``sentinal_service_name=mymaster``).
#  (string value)
#sentinel_service_name = mymaster

#
# Enable filter traces that contain error/exception to a separated place.
#
# Default value is set to False.
#
# Possible values:
#
# * True: Enable filter traces that contain error/exception.
# * False: Disable the filter.
#  (boolean value)
#filter_error_trace = false


[quotas]

#
# From magnum.conf
#

# Max number of clusters allowed per project. Admin can override this default
# quota for a project by setting explicit limit in quotas DB table (using
# /quotas REST API endpoint). (integer value)
#max_clusters_per_project = 20


[trust]

#
# From magnum.conf
#

# This setting controls whether to assign a trust to the cluster user or not.
# You will need to set it to True for clusters with volume_driver=cinder or
# registry_enabled=true in the underlying cluster template to work. This is a
# potential security risk since the trust gives instances OpenStack API access
# to the cluster's project. Note that this setting does not affect per-cluster
# trusts assigned to the Magnum service user. (boolean value)
#cluster_user_trust = false

# Id of the domain to create trustee for clusters (string value)
#trustee_domain_id = <None>

# Name of the domain to create trustee for s (string value)
#trustee_domain_name = <None>

# Id of the admin with roles sufficient to manage users in the trustee_domain
# (string value)
#trustee_domain_admin_id = <None>

# Name of the admin with roles sufficient to manage users in the trustee_domain
# (string value)
#trustee_domain_admin_name = <None>

# Id of the domain admin user's domain. trustee_domain_id is used by default
# (string value)
#trustee_domain_admin_domain_id = <None>

# Name of the domain admin user's domain. trustee_domain_name is used by
# default (string value)
#trustee_domain_admin_domain_name = <None>

# Password of trustee_domain_admin (string value)
#trustee_domain_admin_password = <None>

# The roles which are delegated to the trustee by the trustor (list value)
#roles =

# Auth interface used by instances/trustee (string value)
#trustee_keystone_interface = public

# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#trustee_keystone_region_name = <None>


[x509]

#
# From magnum.conf
#

# Certificate can get the CA flag in x509 extensions. (boolean value)
#allow_ca = false

# List of allowed x509 extensions. Available values: "authorityKeyIdentifier",
# "subjectKeyIdentifier", "authorityInfoAccess", "basicConstraints",
# "cRLDistributionPoints", "certificatePolicies", "extendedKeyUsage",
# "OCSPNoCheck", "inhibitAnyPolicy", "keyUsage", "nameConstraints",
# "subjectAltName", "issuerAltName" (list value)
#allowed_extensions = keyUsage,extendedKeyUsage,subjectAltName,basicConstraints,subjectKeyIdentifier

# List of allowed x509 key usage. Available values: "Digital Signature", "Non
# Repudiation", "Key Encipherment", "Data Encipherment", "Key Agreement",
# "Certificate Sign", "CRL Sign", "Encipher Only", "Decipher Only" (list value)
#allowed_key_usage = Digital Signature,Key Encipherment,Non Repudiation

# Number of days for which a certificate is valid. (integer value)
#term_of_validity = 1825

# Size of generated private key. (integer value)
#rsa_key_size = 2048